[MSNoise] Stacking problem

洪瑞駿 supertyphoon100 at gmail.com
Fri Apr 10 03:48:50 UTC 2015 

Dear Thomas,
I want to say thanks you for giving me lot of advices.

recently, I review all the materials about MSNoise, and follow your
advices.Then I restarted the whole process again. Finally, I got the whole
results form my own data.
the results are very good. this software is so powerful and convenient.
I apologize to you for bothering you again and again, those errors should
not be produced and I should be able to fix them by my own.
I'm a undergraduate and a beginner, so maybe I asked some inappropriate
questions to you, I'll keep adjusting and learning this.

again, sorry and thank you very much.
Charlie Hung
National Central University, Chungli, R.O.C.

2015-03-31 15:19 GMT+08:00 洪瑞駿 <supertyphoon100 at gmail.com>:

> Dear Thomas,
> Thank you again, I did fix the problems after I follow your suggestions.
> But...sorry I want to check something more.This might be the final
> problems I have.
>
> 1. Dose msnoise accept SAC data format? what I will do is follow the data
> structure, right ?
> 2. How to define my own station parameters, i.e. decide the X, Y, Z data
> Would these station parameters be inserted by reading the data structure?
> or I have to do it by hand? or...?（Well, I revised  coordinates by hand on
> the station table...it's ok..?）
> Sorry I have less sense about that... but I'm willing to keep learning！
>
> 3. I can run whole process on the workflow. but I can't call some plots
> (mwcs, dvv). i think it might be related to my wrong input of station
> parameter.
>
> I really thank you for teaching me so much, and since I a beginner, I will
> keep learning the concepts of msnoise.
>
>
> Charlie Hung
> undergraduate student
> Department of Earth Science, National Central University, R.O.C.
>
>
> 2015-03-30 23:42 GMT+08:00 Thomas Lecocq <thlecocq at gmail.com>:
>
>> Hi,
>>
>> the test data provided is SDS.
>>
>> you have to remove all python source files from previous versions from
>> your
>> current directory. Do not run msnoise from the install folder, so:
>>
>> pip install msnoise
>>
>> cd /home/hung
>> mkdir test
>> cd test
>> msnoise install
>> msnoise config
>> ...
>>
>> do not un MSNoise-Master, only use releases (just install using pip, it's
>> easier & safer).
>>
>> Thomas
>>
>> 2015-03-30 17:10 GMT+02:00 洪瑞駿 <supertyphoon100 at gmail.com>:
>>
>> > Dear Thomas,
>> > Thank you for replying promptly !
>> > I followed your suggestion and updated the new version. I restarted the
>> > whole process.But this time, at stacking process,again, shows something
>> > wrong. (I take the test data you provided as the example,and the data
>> > structure follows the " PDF" type, right? sorry I have less concepts
>> about
>> > that... )
>> > Here the terminal printed:
>> >
>> > hung at hung-All-Series:~/msnoise/MSNoise-master/msnoise$ msnoise stack
>> -r -m
>> > -i 10
>> > Lets STACK !
>> > 2015-03-30 21:48:12 [DEBUG] Starting the ref stack
>> >
>> >
>> /home/hung/anaconda/lib/python2.7/site-packages/setuptools-5.8-py2.7.egg/pkg_resources.py:1032:
>> > UserWarning: /home/hung/.python-eggs is writable by group/others and
>> > vulnerable to attack when used with get_resource_filename. Consider a
>> more
>> > secure location (set with .set_extraction_path or the PYTHON_EGG_CACHE
>> > environment variable).
>> > 2015-03-30 21:48:12 [DEBUG] Processing *_UV05:*_UV06-ZZ-1
>> > 2015-03-30 21:48:12 [DEBUG] Found 000 updated days
>> > 2015-03-30 21:48:12 [DEBUG] Processing *_UV05:*_UV10-ZZ-1
>> > 2015-03-30 21:48:12 [DEBUG] Found 000 updated days
>> > 2015-03-30 21:48:12 [DEBUG] Processing *_UV06:*_UV10-ZZ-1
>> > 2015-03-30 21:48:12 [DEBUG] Found 000 updated days
>> > 2015-03-30 21:48:12 [DEBUG] Starting the mov stack
>> > 2015-03-30 21:48:12 [DEBUG] Processing *_UV05:*_UV06-ZZ-1
>> > 2015-03-30 21:48:12 [DEBUG] Found 000 updated days
>> > 2015-03-30 21:48:12 [DEBUG] Processing *_UV05:*_UV10-ZZ-1
>> > 2015-03-30 21:48:12 [DEBUG] Found 000 updated days
>> > 2015-03-30 21:48:12 [DEBUG] Processing *_UV06:*_UV10-ZZ-1
>> > 2015-03-30 21:48:12 [DEBUG] Found 000 updated days
>> >
>> > the CC job has marked 'Done'.
>> > By the way, there are 2 strange points confused me while running msnoise
>> > and I want to tell you,
>> >
>> > 1. The CCF data is in the folder "STACK" which is not the name I
>> defined in
>> > the configuration (I used default name "CROSS_CORRELATIONS" as the
>> output )
>> > .
>> > 2. I found out that I couldn't define a new jobs by using " msnoise
>> > new_jobs" commend, it worked until I tried "python s02new_jobs.py"
>> >
>> > Would you please tell me what may cause these problems? I show you the
>> my
>> > configuration table in the attachment, so it might help you point out
>> what
>> > is wrong.
>> >
>> > sorry I got so many problems, but I really like msnoise. It's very
>> > convenience.
>> > And please give me some suggestion to fix the errors.
>> > Thank you in advance.
>> >
>> > Charlie Hung
>> > undergraduate student
>> > Department of Earth Science, National Central University, R.O.C.
>> >
>> >
>> > 2015-03-29 0:27 GMT+08:00 Thomas Lecocq <thomas.lecocq at seismology.be>:
>> >
>> > > Hi,
>> > >
>> > > can you update to 1.3.1 and test again ? I can't reproduce the bug
>> (line
>> > > 148 looks OK in github)
>> > >
>> > > Thomas
>> > >
>> > > ps: update = pip uninstall msnoise + pip install msnoise
>> > >
>> > >
>> > > Le 28/03/2015 13:21, 洪瑞駿 a écrit :
>> > >
>> > >> Dear Thomas,
>> > >> I run msnoise under my Ubuntu-12.04 and l think it's a user- friendly
>> > >> tool.
>> > >> I just start to learn this but there's a problem arises while doing
>> the
>> > >> stacking process.
>> > >> I noticed that you provide data in the folder "tests" as the example,
>> > so I
>> > >> start my practice here.and the data length is only one day.(could it
>> be
>> > >> the
>> > >> problem?)
>> > >> Everything was fine until stacking.
>> > >> I type the comment: msnoise stack -r -m -i 10, and the terminal shows
>> > >> these:
>> > >>
>> > >> 2015-03-28 16:35:16 [DEBUG] Processing 2010_UV05:2010_UV06-ZZ-1
>> > >> Traceback (most recent call last):
>> > >>    File "/home/hung/anaconda/bin/msnoise", line 9, in <module>
>> > >>      load_entry_point('msnoise==1.3', 'console_scripts', 'msnoise')()
>> > >>    File
>> > >> "/home/hung/anaconda/lib/python2.7/site-packages/
>> > >> msnoise-1.3-py2.7.egg/msnoise/scripts/msnoise.py",
>> > >> line 306, in run
>> > >>      cli(obj={})
>> > >>    File
>> > >> "/home/hung/anaconda/lib/python2.7/site-packages/click-
>> > >> 3.3-py2.7.egg/click/core.py",
>> > >> line 610, in __call__
>> > >>      return self.main(*args, **kwargs)
>> > >>    File
>> > >> "/home/hung/anaconda/lib/python2.7/site-packages/click-
>> > >> 3.3-py2.7.egg/click/core.py",
>> > >> line 590, in main
>> > >>      rv = self.invoke(ctx)
>> > >>    File
>> > >> "/home/hung/anaconda/lib/python2.7/site-packages/click-
>> > >> 3.3-py2.7.egg/click/core.py",
>> > >> line 936, in invoke
>> > >>      return _process_result(sub_ctx.command.invoke(sub_ctx))
>> > >>    File
>> > >> "/home/hung/anaconda/lib/python2.7/site-packages/click-
>> > >> 3.3-py2.7.egg/click/core.py",
>> > >> line 782, in invoke
>> > >>      return ctx.invoke(self.callback, **ctx.params)
>> > >>    File
>> > >> "/home/hung/anaconda/lib/python2.7/site-packages/click-
>> > >> 3.3-py2.7.egg/click/core.py",
>> > >> line 416, in invoke
>> > >>      return callback(*args, **kwargs)
>> > >>    File
>> > >> "/home/hung/anaconda/lib/python2.7/site-packages/
>> > >> msnoise-1.3-py2.7.egg/msnoise/scripts/msnoise.py",
>> > >> line 139, in stack
>> > >>      main('ref', interval)
>> > >>    File
>> > >> "/home/hung/anaconda/lib/python2.7/site-packages/
>> > >> msnoise-1.3-py2.7.egg/msnoise/s04stack.py",
>> > >> line 148, in main
>> > >>      updated_days = updated_days_for_dates(db, start, end,
>> > >> pair.replace('_',
>> > >> '.'), type='CC',
>> interval=datetime.timedelta(days=interval),returndays=
>> > >> True)
>> > >>
>> > >> *TypeError: updated_days_for_dates() got an unexpected keyword
>> argument
>> > >> 'type'*
>> > >> I underline the error line, and I have no idea about that.
>> > >> I've been seeking solutions but got less information. Would you
>> please
>> > >> tell
>> > >> me what's wrong with that?
>> > >> I'm appreciated for your help
>> > >>
>> > >> Charlie Hung
>> > >> undergraduate student
>> > >> Department of Earth Science, National Central University, R.O.C.
>> > >> _______________________________________________
>> > >> MSNoise mailing list
>> > >> MSNoise at mailman-as.oma.be
>> > >> http://mailman-as.oma.be/mailman/listinfo/msnoise
>> > >>
>> > >
>> > > _______________________________________________
>> > > MSNoise mailing list
>> > > MSNoise at mailman-as.oma.be
>> > > http://mailman-as.oma.be/mailman/listinfo/msnoise
>> > >
>> >
>> > _______________________________________________
>> > MSNoise mailing list
>> > MSNoise at mailman-as.oma.be
>> > http://mailman-as.oma.be/mailman/listinfo/msnoise
>> >
>> >
>> _______________________________________________
>> MSNoise mailing list
>> MSNoise at mailman-as.oma.be
>> http://mailman-as.oma.be/mailman/listinfo/msnoise
>>
>
>

More information about the MSNoise mailing list